Short answer: Choose bathroom fixtures in two layers: first the hidden decisions that affect plumbing, framing, waterproofing and electrical work; then the visible fixtures and accessories that complete the room. Before ordering, confirm the room layout, toilet and shower rough-ins, tub drain and filler, vanity and faucet compatibility, finish codes, package contents, delivery timing and the exact installer requirements. A beautiful fixture is only a good purchase when it fits the room and the system behind it.
A bathroom renovation can involve dozens of individual decisions. A toilet may need a bowl, carrier, concealed tank, actuator and seat. A shower may need a valve, trim, diverter, outlets, hand shower, hose and drain. A freestanding tub can require a floor-mounted filler, a separate rough, a drain and an installation plan that is settled before the floor is closed. The most expensive mistakes happen when these pieces are chosen on separate product pages without a room-by-room plan.
This bathroom renovation fixture checklist is designed for Canadian homeowners, designers, builders, contractors and project buyers. It works for a powder room, a primary bathroom, several bathrooms in a new home, a renovation package or a larger residential and commercial specification. Product dimensions, certifications, rough-in requirements, included parts and local code obligations are model- and project-specific. Use this guide to organize the purchase, then have the installer approve the exact products and installation requirements.
Browse bathroom components at FaucetExpress after you have built the room schedule and identified which items must be purchased before rough-in.
What should you buy first for a bathroom renovation?
Start with the room layout and intended use, not a finish or a product photograph. Then lock every fixture that changes the work inside the wall or floor. A practical order is:
| Planning stage | Decisions to make | Why it comes first |
|---|---|---|
| 1. Room brief | Room type, users, layout, tub or shower, vanity size, storage, accessibility and special features. | These choices determine the space available for every fixture. |
| 2. Hidden system | Toilet carrier, shower valve, diverter, tub drain and filler rough, sink supply and drain, blocking, waterproofing and electrical provisions. | These components are difficult or expensive to change after the wall, floor or tile is closed. |
| 3. Visible fixtures | Toilet bowl and seat, shower trim and outlets, tub, vanity, sink, faucet, drain, mirror and accessories. | The visible products must match the hidden system, dimensions and finish plan. |
| 4. Delivery plan | Exact SKUs, package contents, availability, project dates, room labels and staged shipments. | A complete fixture schedule prevents a missing rough-in or one late component from stopping the installation. |
For a simple replacement, you may complete this process in one conversation with a retailer and installer. For a full renovation, multiple bathrooms, a custom home or a commercial project, keep a written schedule. The schedule is the single source of truth for quantities, finishes, rough-ins, accessories and delivery batches.
1. Start with the bathroom’s purpose and layout
Two bathrooms with the same floor area can need completely different fixture packages. A powder room may need only a compact sink, faucet, mirror and toilet. A primary bathroom may include a double vanity, a wall-hung toilet, a large shower, a freestanding tub, a heated towel rail and an electronic bidet seat. A family bathroom may need a tub-and-shower combination, durable accessories and storage that can handle daily use.
Write down the room brief before selecting products:
- Room type: powder room, ensuite, primary bathroom, family bathroom, guest bathroom, rental, commercial washroom or accessible-use space.
- Users and routines: adults, children, guests, aging-in-place needs, mobility considerations, frequent cleaning or high-traffic use.
- Bathing plan: shower only, alcove tub, tub and shower, freestanding tub, steam-ready shower or multiple shower outlets.
- Vanity plan: single or double basin, wall-mounted or floor-standing vanity, integrated top, vessel, undermount or wall-mounted sink.
- Storage and accessories: medicine cabinet, open shelving, niche, bench, towel warmer, robe hooks, toilet paper holder and shower baskets.
- Special features: wall-hung toilet, smart toilet, bidet seat, touchless faucet, heated mirror, heated floor or other powered fixture.
- Finish direction: one primary metal finish, intentional contrast, or a specific collection across the room.
Do not use a product’s overall width as a substitute for a layout. Record the finished wall positions, door swing, window and cabinet locations, floor build-up, ceiling height, plumbing wall and any obstruction above or below the fixture. The installer should confirm the final clearances and local requirements.
2. Build a room-by-room fixture schedule
A fixture schedule turns an attractive design into an order that can actually be installed. Give every room an identifier—such as “Primary Ensuite,” “Main Bath” or “Unit 204”—and give every line an exact model number or a clearly defined specification.
| Bathroom zone | Visible selections | Hidden or compatibility decisions | Final check |
|---|---|---|---|
| Toilet | Floor-mount or wall-hung bowl, seat, flush control, bidet seat or smart toilet. | Rough-in size, carrier/tank, drain and water supply, bowl compatibility, power and service access. | Complete toilet package and installer-approved dimensions. |
| Shower | Trim, handles, shower head, hand shower, hose, slide bar, outlets, body sprays and drain. | Valve platform, diverter ports, finished-wall depth, outlet piping, waterproofing, niche, bench and blocking. | Every desired outlet has a compatible valve path and the package contents are clear. |
| Tub | Alcove, freestanding or drop-in tub; tub filler; hand shower; drain and overflow trim. | Drain location, overflow type, floor or wall rough, filler support, access and finished floor height. | Tub, drain and filler work together in the actual room. |
| Vanity and sink | Vanity, basin, countertop, faucet, pop-up drain, mirror and storage. | Mounting type, faucet holes, deck thickness, supply height, drain position, backsplash and wall support. | Sink, faucet and vanity are treated as one package. |
| Accessories | Towel bars, hooks, toilet paper holder, shelves, shower basket, grab bars and towel warmer. | Blocking, mounting surface, door swing, user reach and finish code. | Locations are set before tile and the quantity matches the room schedule. |
| Electrical and ventilation | Mirror, lighting, fan, heated floor, towel warmer or powered toilet. | Power, controls, access, circuit and local electrical requirements. | Exact product instructions are with the electrician before rough-in. |
3. Set the rough-in decisions before the walls close
“Rough-in” means the concealed plumbing, framing, support or electrical work prepared before the finished wall or floor is installed. The visible trim may arrive later, but the rough-in decisions cannot be left until the final installation if they change the wall or floor.
Wall-hung toilet carrier and concealed tank
A wall-hung toilet is a system, not simply a bowl without a pedestal. The carrier and concealed tank must suit the wall construction, the drain arrangement and the selected bowl. The flush actuator or plate is often a separate selection. Geberit describes its in-wall system as three related choices: the in-wall system, the flush actuator and the compatible bowl.[1]
Choose the full system before framing is finalized. Confirm whether the carrier is intended for the existing wall, a new 2×4 or 2×6 wall, or a pre-wall arrangement. Confirm the bowl, flush volume, actuator and finished seat height as a set. FaucetExpress’s wall-hung toilet buying guide explains the bowl, carrier, flush plate, seat and accessory decisions in detail.
Browse wall-hung toilets, in-wall carriers and actuator plates as connected lines in the same project schedule.
Shower valve, diverter and finished-wall depth
Shower trim is the part you see; the valve body and diverter are the parts that determine how the water is controlled behind the wall. The trim and rough-in may be sold separately. A “2-way” or “3-way” label also does not tell you every possible operating combination, so confirm which outlets can run individually and which can run together.
Brand platforms are not universal. Delta, for example, identifies the trim families that fit its MultiChoice rough valve, while other manufacturers use different valve families.[2] Record the exact rough-in model, trim model, valve type, connection size, service stops, depth, finished-wall range and diverter function before the wall is closed.
Use the complete shower-system buying guide for the component-by-component checklist, then browse shower kits and shower components.
Tub drain, overflow and filler rough
A bathtub order is not complete when the tub is selected. The drain and overflow must suit the tub’s actual waste location and overflow opening. A freestanding tub may need a floor-mounted filler with a separate rough and secure support below the finished floor. A wall-mounted or deck-mounted filler needs a different supply and support plan.
Riobel’s floor-mounted tub-filler documentation is a useful example of why the visible filler and the rough cannot be treated as the same line item: the rough and trim are specified separately, with the rough installed in the floor box or support structure.[3]
For an alcove tub, confirm the drain side, tub dimensions, apron or skirt, wall flange and valve/spout positions. For a freestanding tub, confirm the tub’s footprint, finished floor height, filler reach, drain location and access. Kohler’s installation guidance recommends a dry fit to confirm clearance, level and drain alignment before sealing the tub in place.[4]
Vanity support, sink drain and faucet rough
A wall-mounted vanity needs support inside the wall. A vessel sink changes faucet height and splash planning. A wall-mounted faucet needs a rough-in body and a finished-wall depth that a deck-mounted faucet does not. A double vanity needs a clear decision about two faucets, one widespread configuration or another approved arrangement.
Before the wall or counter is fabricated, record the vanity model, sink model, faucet hole layout, drain position, supply locations, backsplash, mirror and lighting relationship. Do not order a faucet from a photograph of the basin alone; verify the sink’s hole count, spacing, deck thickness and the faucet’s mounting range.
Blocking, waterproofing and service access
Blocking is the reinforcement placed inside the wall for items such as grab bars, a wall-mounted vanity, a shower seat, accessories, a towel warmer or a heavy mirror. Identify those locations before the waterproofing and tile system is installed. Coordinate a shower niche, bench, linear drain, glass enclosure and grab-bar locations as one wet-area plan rather than as unrelated finish selections.
Keep required service access available. A concealed tank, diverter, smart toilet connection or electronic feature may need access for adjustment or future service. The exact access method is product-specific; the installer should follow the manufacturer’s instructions.
4. Complete the toilet package before ordering
Toilets are frequently treated as one line item, but the complete package varies by model. Use the following worksheet:
| Toilet type | Lines to confirm | Questions before checkout |
|---|---|---|
| Floor-mount two-piece | Bowl, tank, seat, supply/stop and any required hardware. | Are the bowl and tank the specified pair? Is the seat included? What is the rough-in and projection? |
| Floor-mount one-piece | Complete toilet, seat, supply/stop and installation hardware. | Does the footprint clear the baseboard and door? Is the seat included? What are the service and delivery requirements? |
| Wall-hung | Bowl, carrier/tank, flush actuator, seat, connectors and installation accessories. | Is the bowl approved for the carrier? Is the actuator for the same system family? Does the wall and finished seat height work? |
| Bidet seat or WASHLET | Compatible bowl, electronic seat, water connection, power and service access. | Does the seat fit the exact bowl? Where is the receptacle? What water pressure, temperature and power conditions does the manufacturer require? |
| Integrated smart toilet | Complete smart unit, water supply, power, shut-off and service access. | Is the electrical plan approved? Can the unit be moved into the room and serviced? Are the installation and warranty conditions understood? |
For electronic products, choose the exact model early. One current TOTO installation guide, for example, identifies a 120 V AC, 60 Hz supply and model-specific water-pressure requirements.[5] That is not a universal requirement for every smart toilet, but it shows why “we will add power later” is an unreliable plan. Have the electrician and plumber review the exact product instructions and local requirements.
Compare the toilet collection with the separate wall-hung, carrier and actuator categories. If you are specifying several rooms, record the complete package for each room instead of multiplying a generic toilet line by the number of bathrooms.
5. Build the shower system as a complete package
A shower package can be simple or highly engineered. Start with the experience you want, then map every outlet to a compatible valve and rough-in.
| Component | What it does | Confirm before ordering |
|---|---|---|
| Mixing valve rough-in | Combines hot and cold water and supplies the control. | Brand platform, pressure-balance or thermostatic type, connection size, service stops, depth and included cartridge. |
| Control trim | Provides the visible handle, temperature setting and sometimes volume control. | Exact rough-in compatibility, finished-wall thickness, finish code and whether the cartridge is included. |
| Diverter or transfer valve | Routes water between the shower head, hand shower, body sprays or tub spout. | Number of ports, usable functions, shared versus independent operation and separate trim requirements. |
| Overhead shower | Delivers the primary spray from a wall or ceiling position. | Head, arm, flange, mounting position, spray pattern, flow rating and whether the arm is included. |
| Hand shower | Supports rinsing, cleaning, seated use and targeted spray. | Hand shower, hose, wall outlet, holder or slide bar, hose length and check-valve requirements. |
| Body sprays or extra outlets | Adds additional spray positions or a second overhead outlet. | Dedicated valve ports, piping route, total flow demand and simultaneous-use plan. |
| Drain and wet-area components | Moves water out of the shower and completes the waterproofed area. | Drain type, waterproofing system, slope, niche, bench, glass and any required access or blocking. |
Do not assume that a product called a “shower kit” contains the rough-in valve, drain, waterproofing or every outlet shown in the photograph. Read the scope of supply for the exact SKU and ask the retailer to identify any separate roughs or accessories before the installer starts.
For a primary bathroom, consider the flow demand and operating mode before selecting multiple outlets. If the user wants the overhead shower, hand shower and body sprays to operate together, the valve arrangement, supply, pressure and drain plan must be checked as a system. If the goal is a simpler renovation, a two-function system may reduce the hidden complexity.
6. Choose the bathtub, drain and filler together
The tub establishes the room’s footprint, the drain position and often the filler location. Select the tub before finalizing those related items.
- Alcove tub: confirm the length, width, drain side, apron, wall flange, tub deck and whether the room will use a tub-and-shower valve.
- Freestanding tub: confirm the footprint, finished floor, drain location, filler reach, filler support and access around the entire tub.
- Drop-in or deck-mounted tub: confirm the deck dimensions, faucet hole layout, service access, overflow and the structure supporting the tub and deck.
The complete tub order may include the tub, drain, overflow, filler, hand shower, rough-in, trim, supply connections and access panel. Browse bathtubs, tub faucets, freestanding tub fillers and bathtub drains as one package.
For a larger order, record which tub is assigned to each room. A freestanding tub with a right-looking filler can still be wrong if the drain or filler lands on the opposite side of the floor framing. A written room assignment prevents an expensive swap after delivery.
7. Coordinate the vanity, sink, faucet and drain
The vanity area is where design, storage, plumbing and daily ergonomics meet. Select these pieces together:
| Decision | What to record |
|---|---|
| Vanity | Width, depth, height, wall-mounted or floor-standing construction, drawer clearance, plumbing cut-outs and wall support. |
| Sink | Undermount, vessel, drop-in, integrated or wall-mounted; basin dimensions; overflow; rim or deck; drain position. |
| Faucet | Single-hole, centreset, widespread or wall-mounted; hole spacing; spout reach; height; handle clearance; finish and rough-in. |
| Drain | Pop-up or grid drain, overflow compatibility, finish code, tailpiece and whether the faucet includes the drain assembly. |
| Mirror and lighting | Mirror size, mounting height, medicine cabinet depth, light position, electrical supply and door clearance. |
A sink’s hole count does not automatically determine the faucet you can use. A wall-mounted faucet may require a concealed body and specific finished-wall depth. A widespread faucet may need three openings with a particular centre-to-centre range. A vessel sink changes the required spout height. Confirm the exact sink and faucet specifications rather than relying on category labels.
FaucetExpress has vanities, bathroom sinks, bathroom sink faucets, single-hole faucets, widespread faucets and wall-mounted faucets. For a double vanity, create two complete faucet and drain lines unless the selected system specifically uses another arrangement.
8. Plan accessories, mirrors and finish coordination
Accessories are small compared with a tub or vanity, but their locations affect the wall, tile, door swing and daily use. Choose them before the tile layout is final.
- Towel bars and rings: place them where wet towels can reach them without interfering with the shower door or vanity drawers.
- Robe hooks: confirm the door swing, wall depth and a location that will not damage the door or tile.
- Toilet paper holder: coordinate it with the toilet projection, side wall and any grab bar.
- Shower storage: decide between a niche, shelf, basket or caddy, then coordinate the waterproofing and framing.
- Grab bars: plan the locations and backing before the wall is closed. A decorative accessory is not a substitute for a properly supported safety fixture.
- Mirror or medicine cabinet: confirm width, depth, swing, electrical requirements and relationship to the faucet and lighting.
- Towel warmer: choose the exact powered or hydronic model early enough for the electrician or plumber to plan the connection.
Use the manufacturer’s finish code for every line. “Brushed gold,” “brushed brass,” “champagne bronze,” “polished nickel” and “stainless” are not universal colour standards. Even within one broad colour family, sheen and undertone can vary. The safest approach is to choose one primary manufacturer finish where possible, or deliberately compare physical samples before mixing brands.
Browse bathroom accessories, grab bars and mirrors alongside the faucets and shower trim, not after every other decision has been finalized.
9. Decide powered features before the rough-in
Smart toilets, bidet seats, heated mirrors, towel warmers, heated floors, lighting and ventilation can improve a bathroom, but they add planning requirements. Put the exact model in the fixture schedule before the electrician closes the wall.
For every powered fixture, record:
- Voltage, frequency, wattage or load and the manufacturer’s required circuit.
- Receptacle or hardwire location, access and protection required by the local electrical authority.
- Water connection, shut-off location, hose path and service clearance for a bidet or smart toilet.
- Control location, sensor position, remote holder and whether the unit needs a clear line of sight.
- How the fixture will be removed or serviced without damaging finished tile or cabinetry.
Do not copy a power or water requirement from a similar-looking product. Use the installation guide for the exact SKU. TOTO’s current WASHLET guide, for example, lists model-specific power and water conditions and instructs the installer to follow the guide rather than substitute unapproved hoses or valves.[5]
Have a licensed electrician or plumber confirm the final installation under the applicable local requirements. This article organizes purchasing decisions; it is not an electrical, plumbing or building-code approval.
10. Order the fixtures in a renovation-friendly sequence
The right order depends on the project, but the following sequence prevents most avoidable gaps:
| When | Order or verify | Do not move forward until |
|---|---|---|
| Design and quote | Room layout, fixture schedule, exact models, finish codes, quantities and alternates. | The installer, designer and buyer agree on what each room includes. |
| Before plumbing rough-in | Carrier, concealed tank, shower valve, diverter, tub drain/rough, tub, wall-mount faucet rough, blocking and electrical provisions. | Rough-in drawings and exact product instructions are available to the trades. |
| Before waterproofing and wall close | Finished-wall depths, outlet locations, niche, bench, grab-bar blocking, service openings and electrical boxes. | The concealed work has been checked against the actual tile, backer and waterproofing build-up. |
| Before final installation | Trim, plates, faucets, shower heads, hand showers, seats, accessories, mirrors and lighting. | All finish parts are present, undamaged and assigned to the correct room. |
| On delivery | Inspect cartons, model numbers, finish suffixes, quantities and included accessories. | Any shortage or damage is documented before the installer discards packaging. |
Do not use a product page’s displayed shipping estimate as the entire project schedule. Availability can vary by finish, model revision, warehouse and manufacturer. When the project has a hard installation date, request a current estimate for the exact SKU and give the retailer the delivery postal code and required-on-site date.
For a multi-room project, staged delivery can be useful: rough-in components first, finish components later, with each carton labelled by room. Confirm the staging plan before placing separate orders so that a split shipment does not create duplicate freight or leave a room without its matching trim.
11. Use a project schedule for multiple bathrooms or a whole home
Large orders should be quoted as a project, not assembled as a pile of unrelated carts. Build a matrix with one row per room and one line per product family.
| Project field | Example of what to record |
|---|---|
| Room ID | Primary ensuite, main bath, powder room, guest suite, unit number or common washroom. |
| Fixture package | Toilet, shower, tub, vanity, sink, faucet, drain, mirror, accessories and powered features. |
| Exact SKU and finish | Full model number, finish suffix, rough-in number and approved alternate if applicable. |
| Quantity | Room quantity, total project quantity and any intentionally specified spares. |
| Rough-in status | Not started, ordered, delivered, installed, inspected or ready for wall close. |
| Delivery batch | Required-on-site date, delivery address, room label and who will receive and inspect the shipment. |
Send this schedule with the plans, installer notes and product links when requesting a quote. FaucetExpress’s bulk-order team can prepare a project quote for a full-home, renovation, builder or commercial purchase. The support team can also help review specifications, compatibility questions, current availability and estimated arrival information. The installer remains responsible for approving the final installation.
12. Common bathroom renovation fixture mistakes
- Choosing the visible trim before the rough-in: the trim may not fit the existing valve or support the desired functions.
- Assuming “kit” means complete: rough-ins, drains, carriers, seats and accessories are often separate.
- Buying a wall-hung bowl without its carrier plan: the bowl alone does not establish the wall system or finished height.
- Choosing a tub filler without the tub and floor plan: the spout may miss the basin or the rough may land in the wrong framing bay.
- Ignoring finished-wall thickness: tile, backer, waterproofing and mortar change where the trim sits.
- Forgetting faucet holes and deck thickness: the sink, counter and faucet must share the same mounting assumptions.
- Leaving powered products until the end: smart toilets, mirrors and towel warmers need early electrical planning.
- Mixing finishes by colour name alone: similar names can look different in the room.
- Ordering each bathroom independently: a room-by-room schedule makes quantities, finishes and delivery batches visible.
- Relying on an online photograph: use the current specification sheet, installation guide and scope of supply for the exact SKU.
Bathroom renovation pre-order checklist
Before you place the order, confirm each item below:
- Room layout, door swing, windows, finished floor and wall build-up are documented.
- The room’s use and bathing plan are settled: powder room, tub, shower, tub/shower or luxury primary suite.
- Every toilet is specified as a complete package, including carrier/tank, actuator, seat and bidet or smart features where applicable.
- Every shower has a compatible valve, trim, diverter and outlet plan, with the desired operating combinations written down.
- Every tub has a matching drain, overflow, filler and rough-in plan.
- Every vanity, sink, faucet and drain shares the same hole, mounting and plumbing assumptions.
- Blocking, waterproofing, niches, benches, grab bars and service access are assigned before walls close.
- Powered fixtures have been reviewed by the appropriate trade using the exact product instructions.
- Finish codes, package contents, quantities and approved alternates are recorded by room.
- Delivery dates, receiving arrangements, carton inspection and staging are agreed before the project begins.
Frequently asked questions
Which bathroom fixtures need to be chosen before the walls are closed?
Usually, any item that changes the concealed plumbing, framing, waterproofing or electrical work should be selected first. That includes wall-hung toilet carriers, shower valves and diverters, tub drains and fillers, wall-mounted faucet roughs, blocking for grab bars or vanities, niches and powered fixtures. The exact list depends on the room and the products.
Do I need to buy the shower rough-in separately?
Often, yes. Some complete shower packages include a rough-in; many trim-only products do not. Confirm the exact scope of supply for the model and make sure the rough-in, cartridge, trim and diverter belong to the same manufacturer platform.
What makes a wall-hung toilet order complete?
Typically, you need the compatible bowl, carrier and concealed tank, flush actuator or plate, seat, connectors and any installation-specific accessories. Add the electrical and water provisions if you are using a bidet seat or electronic feature. Confirm the complete pairing with the manufacturer and installer.
Should the toilet, vanity and shower all be the same brand?
No. A bathroom can combine brands, but each concealed system must be internally compatible. Finishes also vary between manufacturers, so compare actual finish codes and samples rather than assuming that two names describe the same colour.
How far ahead should I order bathroom fixtures?
Order the rough-in-dependent products early enough for the trades to use the exact instructions before framing, plumbing and waterproofing are finalized. Order finish products early enough to inspect them before installation. There is no universal lead time: confirm the current estimate for each SKU, finish and delivery location.
How do I order fixtures for several bathrooms?
Create a room-by-room schedule with exact model numbers, finish codes, quantities, rough-in status and delivery batches. Send it with the plans and installer notes when requesting a project quote. This is more reliable than multiplying a generic bathroom package by the number of rooms.
Can FaucetExpress help assemble a complete renovation order?
Yes. Send the room schedule, product links or model numbers, preferred finishes, installer notes, delivery postal code and required-on-site date. FaucetExpress can help identify package gaps, review product information, check current availability and prepare a quote. Your licensed trades should approve the final installation and local requirements.
Plan the complete bathroom order with FaucetExpress
A successful bathroom renovation is a coordinated system: the toilet must match its carrier or supply, the shower trim must match its valve, the tub must match its drain and filler, the faucet must fit the sink, and every finish and delivery must be assigned to the right room.
If you are renovating one bathroom, send us the fixture models you are considering and the installer’s rough-in notes. If you are furnishing several bathrooms, a full house, a development or a commercial project, send the room schedule and request a project quote through our bulk-orders page. We can help turn a long product list into a coordinated order before the walls and floors are closed.
Technical references
- Geberit North America: In-wall Toilet Systems. Used for the relationship between the in-wall system, actuator and compatible bowl.
- Delta Faucet: MultiChoice Universal Tub/Shower Rough. Used as a manufacturer example of rough-in and trim-platform compatibility.
- Riobel PRO: Floor-Mount Tub Filler — Separate Rough and Trim. Used for the separate rough and visible trim planning example.
- Kohler: How to Install a Bathtub. Used for the dry-fit, clearance and drain-alignment planning example.
- TOTO: WASHLET SW502/TCF6401U Installation Guide. Used for the model-specific electrical and water-planning example.
- Moen Solutions: Shower Planning Guide. Used as a manufacturer planning reference for new installations and remodels.
Technical references and product pages were checked October 5, 2026. Recheck the exact manufacturer instructions, product URLs, package contents, availability and local requirements immediately before publishing and ordering.